Jual Siemens Fire Alarm Semarang

Fire Alarm Siemens memberikan akurasi yang tak terkalahkan dan kemudahan penggunaan untuk personel bangunan, installer, dan pemadam kebakaran.

Sebagai garis pertahanan pertama bangunan terhadap bahaya kebakaran, kepentingan sistem perlindungan kebakaran tidak boleh diremehkan. Semakin dini kebakaran terdeteksi, semakin baik tindakan yang tepat dapat diambil untuk memandu orang keluar dari bahaya dan membatasi kerusakan properti. Inilah sebabnya mengapa sistem perlindungan kebakaran kami bergantung pada teknologi multi-sensor inovatif untuk mengidentifikasi situasi berbahaya secepat dan andal mungkin. Solusi terukur kami tidak hanya menawarkan keakuratan yang tak terkalahkan tetapi juga operasi intuitif untuk membangun personel, pemasang dan pemadam kebakaran. Dan karena mudah dikembangkan, Anda dapat yakin bisnis Anda dilindungi secara optimal bahkan jika ada perubahan persyaratan atau kebutuhan.

1. Siemens Manual Call Point

FDM1101, FDM1101A
Manual call points
collective/SynoLINE600
conventional/SynoLINE300

*FDM1101 manual call points for all fire detection systems with collective/ SynoLINE600 signal evaluation
*FDM1101A manual call points for all fire detection systems with conventional/ SynoLINE300 signal evaluation
*Manual call point with direct operation
*Two-wire installation for all types of cable
*Optional connection terminals (3-pole, 1… 2.5 mm2) for connection of cable shielding
*For surface and recess mounting
*Type with break glass or with resettable plastic element

2. Siemens Beacon Sounder

SOL-LX-W, SOL-LX-C, RoLP-LX,
RoLP
Sounder, beacon, and sounderbeacon
alarm devices
*For fire detector and extinguishing systems
*Loud alarm signal clearly recognizable as a danger signal – even in noisy environments
*Choose from a variety of tones and sound levels
*Choose beacon ranges and beacon frequencies
*For indoor and outdoor applications
*Low current consumption
*Conforms to EN 54-3 and EN 54-23

3. Siemens Heat Detector

FDT181C Collective Heat Detector
Product Manual
Overview
The heat detector FDT181C is a collective detector. It is used for fire detection inside a building.
Characteristics
– Operation modes: A2 (Rate-of-rise and fixed temperature)
– Collective detector, no address setting, polarity free connection
– 360° visible alarm indicator
– Resistant to environment and interference factors such as humidity, corrosive and vibration, with immunity against electro-magnetic interference.
Application
– Communication with FC18 controller via FDCI183 transponder, each FDCI183 can connect max. 32 collective detectors.
– Communication with BC80 controller via BDS161 transponder, each BDS161 can connect max. 10 collective detectors.

4. Siemens Smoke Detector

FDO181C Collective Smoke Detector

Product Manual
Overview
The FDO181C is an optical smoke detector with an optical sensor. It works according to the principle of forward scattering. The detector reacts extremely sensitively to light aerosols caused by fire. The increased sensitivity makes possible the early detection of smoldering and open fires.
Characteristics
– Intelligent detector with built-in CPU, providing advanced distributed intelligence for optimum reliable detection principle
– Opto-electronic sampling chamber detects fire more reliable and accurate
– Collective detector, no address setting, polarity free connection
– Particularly suited for the early detection of smoke-generating flaming and smoldering fires
– Resistant to environment and interference factors such as dust, fibers, insects, humidity, extreme temperatures, corrosive, vapors, vibration, synthetic aerosols. With immunity against electro-magnetic interference
– Self-test of operating status, when fault occurs or low voltage happens, indicator can prompt user
– Automatic drift compensation and dust prompt for reducing false alarm because of dust accumulation
– 360° visible alarm indicator
– Dust cap protects the detector from being contaminated by construction work Communication with FC18 controller via FDCI183 transponder, each FDCI183 can connect max. 32 collective detectors.
– Communication with BC80 controller via BDS161 transponder, each BDS161 can connect max. 10 collective detectors.